DILUTION
We offer a large number of different equipment for dilution, and some of the most common are shown here on the website. If you do not find what you are looking for, please contact us and we will help you to find a solution
Dekati® Diluter DI-1000
Manufacturer: DEKATI
Dekati diluter DI-1000 is one of the world's most widely used diluents for combustion gases. That it is robust, built in stainless steel, no moving parts, can handle 450 C are some of the explanations for its popularity
- Nominal dilution factor ~1:8, can be modified to higher dilution factors up to 1:50
- Output sample flow – up to 45 lpm
- Each unit individually calibrated and provided with a calibration certificate
Dekati® eDiluter™
Manufacturer: DEKATI
Dekati® eDiluter™ is a portable dilution system that makes sample conditioning as easy as it can be.
- Portable two-stage dilution system for particle measurement applications
-
Adjustable dilution factor between 1:25 and 1:225
-
Output sample flow, up to 80 lpm
- Each unit individually calibrated and provided with a calibration certificate
Dilution Systems for Aerosols, serie DIL, DDS, HDS
Manufacturer: TOPAS
Dilution systems of the series DIL have been
designed for defined total flow rates and fixed
dilution factor, especially been developed for filter testing.The dilution systems DDS and HDS can be used for different total volume flows, with the dilution
factor being adjusted
- 2,83, 28,3 and 50 l/min
- DF 10, 100 and adjustable 1:5 to 1:376
Dekati® Engine Exhaust Diluter DEED
Manufacturer: DEKATI
Two stage dilution system as particle number diluters (PND). Evaporation chamber or catalytic stripper to remove volatile particles
- Fulfills all EURO 6 recommendations for a VPR
- Fulfills ISO8178:2017 standard for exhaust emission measurements
- High/Low dilution factor (100 or 1000)
- Also for tailpipe sampling both before and after a DPF or GPF
Portable Dynamic Dilution Sampler - DDS
Manufacturer: TCR TECORA
Dynamic Dilution Sampler for VOC emission sampling,
In accordance with EN 13649;Multistage protection trap on sampled air; Multistage filter on dilution air; Integrated dry gas meter within ±2% uncertainty;
Flow rate range between 0.15 -1.2 l/min; Dilution rate stability within 5%
- Flow rate 0,15 - 1,2 l/min
- Flow adjust 0,1 - 1,2 l/min
- Rechargeable battery with a 7 hours autonom
-
DDS sampler can be used with a sampling
probe for gaseous compounds.
MODEL 1159-10 CAPILLARY DILUTER 1:10
Manufacturer: GRIMM AEROSOL TECHNIK
The 1159-10 is a diluter with a fix dilution ratio for a defined sample flow rate. It can be easily connected to any portable GRIMM aerosol spectrometer.No compressed air necessary for dilution, manual adjustment of best dilution fit when needed, small & portable.
- Flow 1,2 l/min
- Dilution 1:10 or 1:100 (model 1159-100)